This is topic A/F meter install in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=007137
Posted by ci$ko (Member # 2425) on
:
i got the autometer a/f wheres the 02 wire that i hook into ? car is an 89 fox thnks
Posted by Black94 5.0 (Member # 655) on
:
I ran my A/F guage wire down the center into the shifter boot and under the car straight to the O2...I forget which wire it was, but I ended up having WIKD281 test each one of the O2 wires until (Me sitting in the car) I could see the gauge work...I also wired a signal wire from both O2's to a switch then from the switch to the gauge....The switch is so I could read either side of the engine or either O2...
When the car is warm and the gauge is hooked up it will flicker back and forth between rich and lean...That is normal....
Posted by ci$ko (Member # 2425) on
:
thats what i was thinking but someone said i should wire it in by the cpu thanks
Posted by xomp (Member # 1785) on
:
http://www.autometer.com/hp/techtips/air_fuel_hookup/air_fuel_hookup.html
Posted by Black94 5.0 (Member # 655) on
:
quote:
Originally posted by xomp:
http://www.autometer.com/hp/techtips/air_fuel_hookup/air_fuel_hookup.html
Nice link!... ![[patriot]](graemlins/patriot.gif)
Fueled by Ford Mustang Owners
on CaliforniaFords.com