This is topic Question about heads in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006841
Posted by bunchmyfunky (Member # 360) on
:
The 4.6 2v heads for 02+ are different then the 01s and before. What's different between them are the rocker arm ratio for the windsor heads are 1.81 to 1 while the romeo rocker spec out at 2.02 and 2.03. the romeo does list a higher lift on the exhaust side. How benificial would this be to my setup. On the intake side I have a 3 1/2" CAI/Powerpipe 70mmTB with a ported upper intake. On the exhaust side I have LTs OR/X and a 2 1/2" catback. Would I see good gains if I put these heads on the car.
Posted by shade- (Member # 298) on
:
why not a 4V swap ![[Razz]](tongue.gif)
start running mid 11's with 4.56s and enough tire with mild bolt-ons ![[worship]](graemlins/worship.gif)
Posted by bunchmyfunky (Member # 360) on
:
No 4v for now maybe the next car. I have some goals for the 2v I want to meet ![[Smile]](smile.gif)
Fueled by Ford Mustang Owners
on CaliforniaFords.com