This is topic Installing FMS AC Eliminator Kit.....?s Any websites? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006833
Posted by AL STOCK (Member # 1852) on :
 
Hey guys,

I just got brand new AC Eliminator Kit from Ford Dealership and i asked the guy if i needed another belt and he told me no but he was wrong.. So as of now i dont have the right belt..

What size belt would i need?

Another question..How hard is it to install this kit? Anyone knows how to? It should be easy but the black bracket is what confuses me lol

Any websites?

Thanks
David
 
Posted by Yung Than (Member # 728) on :
 
Make sure it's for a 94/95. I had the same problem when I put the a/c delete on my 94GT. Turns out I could just use a shorter belt so I sold the a/c delete kit all together.
-
 
Posted by DropTopFox (Member # 1689) on :
 
PurpleNotch knows how, the belt number at Kragens is 5060845 [patriot]
 
Posted by mtbaughs (Member # 4052) on :
 
You don't even need an AC delete kit for a 94/95. All you need is a shorter belt
 
Posted by AL STOCK (Member # 1852) on :
 
Thanks, no actually its for a 87-93 5.0 sorry for mis-understanding....


Yeah we got the belt but removing AC components is a b1tch! As of now im TRYING to get the AC box located nxt to the fenderwall out by CUTTING the metal wire out of the wall..

Anyone got better ways to get all the ac wires out?
 
Posted by 88gt (Member # 579) on :
 
Did you buy the special tools from Pep Boys or another store like it for removing AC lines? It'll make your life a whole lot easier.
 
Posted by AL STOCK (Member # 1852) on :
 
quote:
Originally posted by 88gt:
Did you buy the special tools from Pep Boys or another store like it for removing AC lines? It'll make your life a whole lot easier.
Whoa, what tools? How do i remove the AC lines off the damm fenderwall thats connected to the little bottle type thing? Do i just cut it out?

Lemme know
Dave
 
Posted by 1FastLX (Member # 1178) on :
 
I did this awhile back on my mustang.

go to kragens or pepboys, Get the A/C line disconect tool. and for the Black canister you will need a couple of wrenches.

good luck, laters

[ February 08, 2004, 09:50 AM: Message edited by: 1FastLX ]
 
Posted by AL STOCK (Member # 1852) on :
 
Do i dont need to get underneath the dash to get any lines off right? Just clip the lines off underneath the engine and get it done...

Im going to kragens right now and ask for the a/c line disconnect stuff


Already have the black canister off.. Just the two lines that go from the AC to the fenderwall is left ..

Thanks
Dave
 
Posted by AL STOCK (Member # 1852) on :
 
....So after i take the PS Pump out... Theres a big 12inch bolt sticking out the engine where the PS Pump would slide into... Does that bolt stay there? Or do i have to remove it somehow?
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com