This is topic Looking for a 3 inch Crank Pulley in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006700
Posted by Yellow94GT (Member # 431) on
:
Anyone know where I can find a 3 inch crank pulley for my 94?
Posted by 4.6 EATIN GM'S (Member # 1633) on
:
asp sells them.also i suggest getting a different alternator pulley also. mike has the same set up
Posted by sac 5.0 (Member # 2980) on
:
just got mine from asp
Posted by shade- (Member # 298) on
:
wow that sucks (for me), I thought there were no race crank underdrive pulleys for 94-95 style front dress. I called around about 6 months ago
(including ASP)
Posted by 4.6 EATIN GM'S (Member # 1633) on
:
quote:
Originally posted by shade-:
wow that sucks (for me), I thought there were no race crank underdrive pulleys for 94-95 style front dress. I called around about 6 months ago
(including ASP)
tell me if im wrong but fox body 5.0 motors and sn95 5.0 motors are the same thing?
Posted by Blue Oval (Member # 2548) on
:
the crank pulleys along with the other pulleys have a diffrent offset.than the fox motors
Posted by Yellow94GT (Member # 431) on
:
Are you guys just telling me where you got the pulley for you fox's or do you actually know that they are made for a 94/95???
I have looked on ASP's website and found nothing, maybe I'm over looking something.
Posted by shade- (Member # 298) on
:
all I know is I ran 94-95 front dress, wanted to run a 3" race crank pulley, checked all the manufactures (including ASP) checked ebay, checked the corral, checked everywhere and even spoke to a machine shop that would make one if I gave them a 94-95 stock crank pulley and a 3" pulley for a 87-93 to use to mock it up with.
lol.
I swapped to 87-93 front dress. Hope you don't have to, good luck. Doesn't a 347 make enough power to put the little pulley away?
Posted by Yellow94GT (Member # 431) on
:
quote:
Originally posted by shade-:
all I know is I ran 94-95 front dress, wanted to run a 3" race crank pulley, checked all the manufactures (including ASP) checked ebay, checked the corral, checked everywhere and even spoke to a machine shop that would make one if I gave them a 94-95 stock crank pulley and a 3" pulley for a 87-93 to use to mock it up with.
lol.
I swapped to 87-93 front dress. Hope you don't have to, good luck. Doesn't a 347 make enough power to put the little pulley away?
Never enough power Joe, you know that
Do you know just how much the offset difference on the fox vs. sn95 are?
Thanks for the info.
[ January 29, 2004, 03:07 PM: Message edited by: Yellow94GT ]
Posted by shade- (Member # 298) on
:
it's significant, somewhere around 1.5", I could measure to be precise if you want.
the 94-95 crank pulley sits very close to the dampener,
Posted by Jeff S (Member # 371) on
:
ASP will make you a 3" pulley for $125. I just order custom crank pulley from them today.
Posted by Yellow94GT (Member # 431) on
:
quote:
Originally posted by Jeff S:
ASP will make you a 3" pulley for $125. I just order custom crank pulley from them today.
Thanks Jeff
Posted by Camara90 (Member # 134) on
:
or another way to fix the offset problem could be with spacers like on that universal dampnmer that came with the motor.
Posted by Yellow94GT (Member # 431) on
:
quote:
Originally posted by Camara90:
or another way to fix the offset problem could be with spacers like on that universal dampnmer that came with the motor.
I off'ed that piece of shit
Posted by Camara90 (Member # 134) on
:
ya fuck that dampner it will be the last summit universal one ii buy!
Fueled by Ford Mustang Owners
on CaliforniaFords.com