This is topic Replacing tired stock 5.0 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006576

---

Posted by QwikStang (Member # 2933) on :
 
I am starting to plan out my next motor because I know mine will start to get tired soon (120k). I want to build one on the side myself this year getting small parts along the way. My question is...If I want to be around 300-350hp on a 95 GT, what setup would you guys recommend for a 302? Should I buy a new block and start from there or is it just as good to get a used block and have it cleaned up? What heads/intake are inexpensive but worth buying? I don't want a monster, just something with a bit more bite than my stock GT.
 

---

Posted by jmcclesk (Member # 1355) on :
 
I have 0 mile shortblock with all the good stuff email me if you like jonmccleskey@msn.com
 

---

Posted by DropTopFox (Member # 1689) on :
 
a used block will be just as good in this case since you don't want gobs of power. Basically the simplest way tohit your goal would probably be the X cam with some 1.7's, 10:1 or higher compression with some AFR 165's or 185's or Twisted Wedges and your favorite aftermarket intake manifold. Good luck
 

---

Posted by 86GT5.0 (Member # 2136) on :
 
i'm going to use a ford racing sportsman block for my next motor, a e cam, 1:7 rockers, afr 185, and a edelbrock performer rpm 2, forged crank, h beem rods, forged pistons. but that is just my combo(have not decided on throttle body, egr plate, or injector size[i have a c&l mass air already])
 

---

Posted by QwikStang (Member # 2933) on :
 

quote:

---

Originally posted by jmcclesk:
I have 0 mile shortblock with all the good stuff email me if you like jonmccleskey@msn.com

---