This is topic where to get Camber Plates Installed? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006506
Posted by Procharged2Kv6 (Member # 1563) on :
 
im from sf area.. and was wondering where's the best place to get my cast and camber kit installed..??? how much would it be too??? thanks.. i appreciate it!! =)
 
Posted by DropTopFox (Member # 1689) on :
 
Hanlon tire in San Bruno. Dave is avery knowledgeable guy and he'll do it for a great price [Whoo Whooooo!]
 
Posted by Procharged2Kv6 (Member # 1563) on :
 
how much should i be quoted for?? $50-$100?????
 
Posted by Black94 5.0 (Member # 655) on :
 
Most shops can install CC plates, but you might want to look for one that has an alignment rack too....That way you can kill 2 birds with 1 stone...

Locally, I have to say Apex has to have the most experience with Mustang CC plates, but you would have to take it somewhere else afterwards, cause last time I was there, there wasn't an alignment rack... [Big Grin]
 
Posted by JohnB (Member # 969) on :
 
CC Plates are a no-brainer. If you can follow simple instructions, it'll take MAYBE 30 minutes.

On the other hand, if you don't want to get dirty..I'd do them for $50. [Big Grin]
 
Posted by MR GO FAST (Member # 2088) on :
 
Precision Auto
1049 san mateo ave
san bruno
650-589-5529
speak with alan
He can install and align the car on the same visit.
 
Posted by Joel Villarreal (Member # 3975) on :
 
Maier Racing in Hayward. Ask for Mike he's a distributor for Maximum and is a specialist in Mustangs.

Maier Racing,
22215 Meekland Ave,
Hayward, CA 94541
510-538-2364
 
Posted by Procharged2Kv6 (Member # 1563) on :
 
thanks everyone! i greatly appreciate it... u guys helped me out pretty fast, i'll be sure to call them tomorrow! thanks!
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com