This is topic best location for 6AL on fox in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006178

---

Posted by gercolla1 (Member # 3068) on :
 
Where is the best place to install a msd 6AL. I have a cold air intake and my battery is in the stock location. Should it even be installed in the engine compartment? Peace
 

---

Posted by Black94 5.0 (Member # 655) on :
 
I mounted my 6AL on an 1/8" thick aluminum sheet that I mounted to the frame rail(Pre drilled and then used "self tapping" screws)...Its underneath the windsheild washer bottle in the drivers side fender well...It gets plenty of cool air and never got a drop of rain on it...Its close to the battery and ignition coil too....
 

---

Posted by PurpleNotch (Member # 2902) on :
 
i mounted mine inside the fender well behind where the battery goes its out of the way and looks clean. you just have to remove the inner fender to install and then just put the fender well back in no one even knows its there, only the ignition.
 

---

Posted by gercolla1 (Member # 3068) on :
 
ah
 

---

Posted by 4.6 EATIN GM'S (Member # 1633) on :
 
in my 87 i put it under my driver seat
 

---

Posted by 1SLOWLX (Member # 558) on :
 
I saw where shaun mounted it and it looks good. One thing I thought of shaun is that you don't want to get it wet alot so don't drive through puddles
 

---

Posted by PurpleNotch (Member # 2902) on :
 

quote:

---

Originally posted by 1SLOWLX:
I saw where shaun mounted it and it looks good. One thing I thought of shaun is that you don't want to get it wet alot so don't drive through puddles

---

hey albert since when do i drive in the rain anywayz man
 

---