This is topic My mustang is Alive and Stronger than before! in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006162

---

Posted by Hater (Member # 3085) on :
 
I just got my mustang last monday, with the new 4.6 engine from DSS Racing,,and finally got that "check engine light" fixed, just bought a 5spd ECU,,
I used to have the Saleen Supercharger (Eaton M-90)and I took if off and installed the stock intake,,my car feels stronger that with that week blower, and its NA right now,,wait until I install the NX kit that I will be ordering anytime now,,

Block: NEW Production 4.6 block, ARP main studs, and new metric oil galley and freeze plugs are installed.

Crank: NEW forged steel 8-bolt crankshaft balanced to racing tolerances.

Rods: DSS 4340 forged steel H beam rods balanced to racing tolerances.

Pistons: Custom forged flat top, Balanced to racing tolerances. (Other optional compression ratios available)

Rings: Severe duty Speed-Pro moly rings. Perfect for high boost or nitrous levels.

Bearings: Federal Mogul Tri-Metal rod and main bearings.

Also I included upgraded PI heads kit already installed,,that comes with better valves, valve-springs, retainers, the works,,so now I have strong bottom end, strong heads,,I will work on the intake and transmission now ,,
The compression ratio is 9.2:1 ,,how do u guys think it will work with a 150 hp shot of NX?
 

---

Posted by 4.6 EATIN GM'S (Member # 1633) on :
 
shit if u r going the n/a route with the jug u should have bumped the comp. up to atleast 10.5:1.
but thats my opinion. thats whjat i did
 

---

Posted by DropTopFox (Member # 1689) on :
 
My car loves the NX, make sure you hit up Eric(66AC Cobra) for the kit. He has the best prices and is local. Good luck man, sounds awesome
 

---

Posted by 66 AC COBRA of CA PERFORMANCE (Member # 904) on :
 

quote:

---

Originally posted by DropTopFox:
My car loves the NX, make sure you hit up Eric(66AC Cobra) for the kit. He has the best prices and is local. Good luck man, sounds awesome

---

i already have been talkin with him and we have one bad ass kit for him
hater, are u still plannin on goin dual stage
 

---

Posted by 1SLOWLX (Member # 558) on :
 
That sounds like fun man but a little more compression wouldn't have hurt any
 

---

Posted by mustanggt5091 (Member # 444) on :
 
sweet
 

---

Posted by Blue Oval (Member # 2548) on :
 

quote:

---

Originally posted by mustanggt5091:
sweet

---

 

---

Posted by Hater (Member # 3085) on :
 
I'm still thinking about geting that dual stage,,I'm probably going to order the single stage for now,,and as a save the rest I'll get the second stage
 

---

Posted by Hater (Member # 3085) on :
 
How much HP do you guys think my car is making to the rear wheels NA? I will have it dynoed next week,,just want to see who gets closes to the real number,,remember that this engine is fully balanced and blueprinted so it will make more hp that stock, plus the PI head upgrade kit gives more HP as well..
 

---

Posted by 4.6 EATIN GM'S (Member # 1633) on :
 
did u p/p the heads,and go with custom cams?is it still the stock plastic pi intake?

if u didnt port the heads and u got stock cams im predicting 237 rwhp and 246 rwtq.
 

---

Posted by Hater (Member # 3085) on :
 

quote:

---

Originally posted by 4.6 EATIN GM'S:
did u p/p the heads,and go with custom cams?is it still the stock plastic pi intake?

if u didnt port the heads and u got stock cams im predicting 237 rwhp and 246 rwtq.

---

quote:

---

Originally posted by Hater:

quote:

---

Originally posted by 4.6 EATIN GM'S:
did u p/p the heads,and go with custom cams?is it still the stock plastic pi intake?

if u didnt port the heads and u got stock cams im predicting 237 rwhp and 246 rwtq.

---

How much did ur car dynoed?

---

i havent dynoed the new motor yet cuz it aint in the car. but in january i could give u some #'s.
 

---

Posted by Hater (Member # 3085) on :
 

quote:

---

Originally posted by 4.6 EATIN GM'S:

quote:

---

Originally posted by Hater:

quote:

---

Originally posted by 4.6 EATIN GM'S:
did u p/p the heads,and go with custom cams?is it still the stock plastic pi intake?

if u didnt port the heads and u got stock cams im predicting 237 rwhp and 246 rwtq.

---

How much did ur car dynoed?

---

i havent dynoed the new motor yet cuz it aint in the car. but in january i could give u some #'s.

---

LOL LOL
 

---

Posted by 4.6 EATIN GM'S (Member # 1633) on :
 

quote:

---

Originally posted by Hater:

quote:

---

Originally posted by 4.6 EATIN GM'S:

quote:

---

Originally posted by Hater:

quote:

---

Originally posted by 4.6 EATIN GM'S:
did u p/p the heads,and go with custom cams?is it still the stock plastic pi intake?

if u didnt port the heads and u got stock cams im predicting 237 rwhp and 246 rwtq.

---

How much did ur car dynoed?

---

i havent dynoed the new motor yet cuz it aint in the car. but in january i could give u some #'s.

---

LOL LOL

---

so whats the specs on the motor like head work or cams,intake,ect.
 

---

Posted by FasterDamnit (Member # 442) on :
 
Less than bunhcmyfunky's '01 GT.
 

---