This is topic Installing subframes... in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=006068
Posted by 87 Saleen (Member # 1549) on
:
MM weld in. should I take the interior out? any tips?
Posted by 66 AC COBRA of CA PERFORMANCE (Member # 904) on
:
mock them up, mark where u will be welding, clean the sfc's and the body with a wire wheel or other cleaning tool, weld very thouroghly (sp?) on a low setting so u dont burn holes in the body
it is a hard job, expect to spend a good part of a day to do it right
make sure all four tires are raised equally or u will stiffen the chassis in an un natural position
unless u feel very confident in welding sheet metal i would have a professional do it
i have been welding for a few years and it was still a task to get it done and lookin good
i suggest getting 2 small piece of sheet metal and practice welding t joints so u dont start burning holes in ur body shell
dont forget to paint the welds and connectors when done so they dont rust
Posted by 87 Saleen (Member # 1549) on
:
Wow, good shit! Thanks for taking the time to help. Boyeee!!!!
[ November 18, 2003, 11:46 PM: Message edited by: 87 Saleen ]
Posted by Black94 5.0 (Member # 655) on
:
Yeah, make sure the car is suspended by all four wheels evenly...I didnt take my interior out neither did I on Brians Saleen with the install of the MM sfc...
My advise is to have someone weld it that has done it before and that is a good and skilled welder...
Fueled by Ford Mustang Owners
on CaliforniaFords.com