This is topic wat about this cam XE282HR in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005994
Posted by BOTTLED.LX (Member # 3267) on :
 
XE282HR any body know if this cam is good for this 351w w/ air gap intake
750 carb
longtubes, o/r h pipe
roush 200 heads, 1.6 rrockers
150 of n2o
 
Posted by 66 AC COBRA of CA PERFORMANCE (Member # 904) on :
 
do u have a roller 351 block [Confused]
just makin sure u know that older blocks need special lifters to run hydro roller cams
 
Posted by 93PONY (Member # 60) on :
 
It's a good cam & will make lots of power on a 351 with a carb.
 
Posted by BOTTLED.LX (Member # 3267) on :
 
so if i get this cam im going to need roller lifters? [Confused]
 
Posted by mike g (Member # 2919) on :
 
yes the hr at the end stands for hydraulic roller.

i believe you need something like this CRN-36532-16 (summit p/n#) to run that cam.(this is if its not a roller block)

[ November 12, 2003, 11:27 AM: Message edited by: mike g ]
 
Posted by BOTTLED.LX (Member # 3267) on :
 
COOL THANKS
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com