This is topic nuetal safteyy switch in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005899

---

Posted by sweet (Member # 3093) on :
 
does anyone know how to bypass the nuetral saftey switch on a 89 ford mustang. thanks
 

---

Posted by zpyro35 (Member # 3745) on :
 
why would you want to? it's a safety feature so you don't run yourself over with your own car. but i guess you would just take the wires off of the switch itself and solder them together, and make sure they're insulated. but it's just an educated guess, so don't take my word for it.
 

---

Posted by 87 Saleen (Member # 1549) on :
 
I cut the little blue wire by my clutch pedal. it was actually a life saver. I was cruisin down the blvd one day and my clutch pedal went limp(cabled snapped) So i just rev-matched shifted my ass on home. I caught a couple lights, but then i just turned the car off and put it in first. when the light turned green i started the car in while in gear, and commensed my drive home.

That's why someone would want to.
 

---

Posted by Sean90GT (Member # 33) on :
 
AOD cars are wired for the switch but have a jumper installed. Get a hold of one of those jumpers, unplug the switch and plug in the jumper.

Sean.
 

---

Posted by BlueOvalRacing (Member # 1531) on :
 
Why would you cut the wire? all you had to do is push the clutch pedal down even though the cable was snapped. Anyway, it sounds to me like the guy has an automatic.... Not too many neutral safety switches on manual trannies
 

---

Posted by 87 Saleen (Member # 1549) on :
 
at least my bullits fit

Whoops, what was I thinking?
 

---

Posted by 94gt (Member # 3060) on :
 

quote:

---

Originally posted by Sean90GT:
AOD cars are wired for the switch but have a jumper installed. Get a hold of one of those jumpers, unplug the switch and plug in the jumper.

Sean.

---

hell,make your own!
 

---

Posted by jr5.0 (Member # 399) on :
 
i convt my aod to 5 speed just unplug the connector and run a jumper wire on the connector.
 

---

Posted by Blue Oval (Member # 2548) on :
 
yah im the one with the bullet rims not him you dumbazz, ur still helping me right

[ November 05, 2003, 10:04 PM: Message edited by: Blue Oval ]
 

---

Posted by sweet (Member # 3093) on :
 
i cannot get the car to start. converted from a AOD to a t-5 and now it will not start.
 

---

Posted by BlueOvalRacing (Member # 1531) on :
 
lol, i have bullits also - but I made my own centercaps
 

---

Posted by 2stangs69-91 (Member # 1951) on :
 
you have to make a jumper that conects the red and light blue wire to the white wire in the harness down at the trans were the old Nutral saftey switch hooks up. you might also have to adjust the clutch start switch or just reinstall the jumper at the pedal.
 

---

Posted by Saint (Member # 2746) on :
 
Are you sure you wired the revease light harness right? When i made my car a 5 speed the wires colors didnt match right and every time i would push the clutch in it would inguage the starter
 

---