This is topic clutch noise in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005890
Posted by 4.6GT (Member # 2643) on
:
whats going on when you push the clutch in and it makes a squeky kind of noise like if something is rubbing?
Posted by 66 AC COBRA of CA PERFORMANCE (Member # 904) on
:
throw out bearing has taken a shit
u have to pull the tranny, put a new one on, then slide the tranny back in
if u have any doubts that the clutch might go replace it right now while the tranny is out
Posted by 4.6 EATIN GM'S (Member # 1633) on
:
quote:
Originally posted by 66 AC COBRA of CA PERFORMANCE:
throw out bearing has taken a shit
u have to pull the tranny, put a new one on, then slide the tranny back in
if u have any doubts that the clutch might go replace it right now while the tranny is out
if its making the noise when the clutch is out then its ur throwout like what he said above.
might as well upgrade the clutch also
Posted by 4.6GT (Member # 2643) on
:
anybody around here know how to do that?my car is a 2002 should it be doing thet that fast
[ November 03, 2003, 07:17 PM: Message edited by: 4.6GT ]
Posted by Norgs (Member # 649) on
:
warrenty it
Posted by Norgs (Member # 649) on
:
could also be the pilot bushing
Posted by yesIdid (Member # 58) on
:
I had the same noise until I upgraded my clutch/flywheel/driveshaft.
[ November 03, 2003, 09:46 PM: Message edited by: yesIdid ]
Posted by 4.6GT (Member # 2643) on
:
i would take it in but i already installed gears and they would probably void the warranty wouldt they or they wouldnt even check the rear end?
Posted by slidewayz94 (Member # 3101) on
:
your rear end gears should have no effect on the clutch operation.
Fueled by Ford Mustang Owners
on CaliforniaFords.com