This is topic Loc tite on pro 5.0 shifter? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005707
Posted by Black88GT (Member # 394) on :
 
It says nothing about it in the directions, but I notice there was some on there before. Thanks

[ October 15, 2003, 04:43 PM: Message edited by: Black88GT ]
 
Posted by 91sleeper (Member # 779) on :
 
Just use a torque wrench and torque it down to the reccomended specs.

[ October 15, 2003, 05:26 PM: Message edited by: 91sleeper ]
 
Posted by Black88GT (Member # 394) on :
 
Well, I dont know the specs [Frown] But to be safe I locked them in [Smile] Thanks
 
Posted by 87 Saleen (Member # 1549) on :
 
Good, you'll need it. It took me a coulpe times to figure it out... [burnout]
 
Posted by LAST302 (Member # 808) on :
 
Definitly use loc tite and if you torque them to factory specs you will be tightening them daily! Tighten the shit out of those bolts!!! And make sue you let the loc tite set up before driving. Good luck
 
Posted by st5150 (Member # 51) on :
 
I have the original pro 5.O (Black, not gold), and I've had no problems by not using loc-tite.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com