This is topic ALUM GT 40 HEADS W/ SUPERCHARGER? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005587

---

Posted by KLR89GT (Member # 3324) on :
 
What do you think about using aluminum gt 40 heads with a vortec supercharger running 10lbs of boost. Should I go to a higher cfm head?
 

---

Posted by ON N2O (Member # 2067) on :
 
well it depends on your money situation. lets just say that i am using the gt40 heads with my twin turbo kit so i think just a little supercharger would be ok
 

---

Posted by KLR89GT (Member # 3324) on :
 
have you had any problems blowing head gaskets.....and are you using the iron or aluminum heads???
 

---

Posted by Blu50Stang (Member # 489) on :
 
To On N20's comment, what's a little blower? How bout a larger blower(say something like a Novi 2000)?

I know someone seeing 10lbs from a Novi 2000 on aluminum GT40s and he's had no problems yet.

[ October 05, 2003, 11:21 AM: Message edited by: Blu50Stang ]
 

---

Posted by st5150 (Member # 51) on :
 
If you haven't bought the heads yet, I would definately get some higher flowing aluminum heads like the Trick Flow twisted wedge.
 

---

Posted by mustanggt5091 (Member # 444) on :
 
Dont know your setup but if you already have the GT40's I wouldnt worry about it. If you are looking into a set than I would recommend a set of AFR's!
 

---

Posted by 1SLOWLX (Member # 558) on :
 
I think you should go with TFS
 

---

Posted by 91 5.0 (Member # 1527) on :
 

quote:

---

Originally posted by st5150:
If you haven't bought the heads yet, I would definately get some higher flowing aluminum heads like the Trick Flow twisted wedge.

---

 

---