This is topic project 5.0 KILR or LT1/LS1KILR? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005531
Posted by 67stang12s (Member # 2314) on
:
what can i expect from my 302 in my 67 stang
.200 dome kb pistons
isky 280 mega cam
vitor jr heads
750 speed demon carb
rpm air gap intake
aod 3000 stall
3.50 gears
am i a lt1/ls1 kilr yet/
what numbers can i expect hp/ tq
any 1/4 mile guess
[ September 29, 2003, 10:24 PM: Message edited by: 67stang12s ]
Posted by shade- (Member # 298) on
:
I'm no expert on carbs, but that sounds too big (maybe 650 instead?) and I think you want to match the heads with a Vic Jr intake as well (dual plane for the street(?)
lastly... you'll get 'em all!
Posted by Chosen1 (Member # 1906) on
:
thats a similar setup that I used to run in my fastback. i had the comp 280H cam, stock milled heads, Carter carb, rpm air gap, 3.90 gears, toploader...before the engine took a shit, I was right between 13.85 and 14 flat. Your car is lighter, better heads...my guess is 13.4/13.7
Fueled by Ford Mustang Owners
on CaliforniaFords.com