This is topic what hp and 1/4 time in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005281

---

Posted by krazy-stang (Member # 2194) on :
 
how much horse power and can i expect to the rear with this set up?
65mm tb
24lb injectors
bbk shorty headers
catback flowmaster
pullies
ported stock heads
ported cobra upper and lower
e303 cam
1.6 rockers
 

---

Posted by Jeff S (Member # 371) on :
 
I'd say around 265rwhp if your A/F ratio and timing are adjusted properly.
 

---

Posted by st5150 (Member # 51) on :
 
I'm going to gues 252 rwhp
 

---

Posted by onesicklx (Member # 285) on :
 

quote:

---

Originally posted by Jeff S:
I'd say around 265rwhp if your A/F ratio and timing are adjusted properly.

---

right on the money...
 

---

Posted by section525 (Member # 2819) on :
 
What are 19# injectors good up to HP wise? About 350HP?

Here is gonna be my setup. WHat do you guys think HP is?:

MAC Intake
Explorer Upper
Explorer Lower
GT40-P Heads
FMS Headers
Magnaflow Catback
e-303 cam
FMS 1.6 Rockers
Chip

Think the stock 19#er will be okay? What HP do you see there?

Thank!
 

---

Posted by st5150 (Member # 51) on :
 
section525- you'll probably be fine with 19's and an adjustable fuel pressure regulator.
 

---

Posted by section525 (Member # 2819) on :
 
Thanks st5150!

What HP numbers do you see there? My goal is for 300HP at the crank. What else do you think I should do?

Thanks!
 

---

Posted by st5150 (Member # 51) on :
 
With exhaust and underdrive pullies you'll reach your 300 HP goal, but as for RWHP, I have no idea how much your explorer AOD tranny robs so I can't make a guess.
 

---

Posted by section525 (Member # 2819) on :
 
They don't make any pullies for my ACC brackets. So.. maybe porting the intakes? Or.... what?

As far as the AOD-E.. I'd say about 50%

Thanks!
 

---

Posted by st5150 (Member # 51) on :
 
krazy-stang - As far as your 1/4mile time, it all depends on your driving and launch. Virtually any aftermarket heads/intake/cam on a 5.O will give you enough MPH for 12.9's with enough traction and driving.


section525 - Maybe a more agressive cam, better valve springs (a must regardless), and a higher RPM stall converter is the ticket for you?
 

---

Posted by section525 (Member # 2819) on :
 
Yeah.. I just picked up some FMS valve springs yesterday. They're new with retainers for $56 Good ole eBay.

I won't need the retainers, right? Since I have the FMS 1.6 rockers and theyre going on gt40p heads?

I think I'll pretty much stick with the mods I have listed and expect the big HP numbers out of my 331. I want to keep this one semi-maybe-hopefully pass smogable.

Thanks st5150!
 

---

Posted by PurpleNotch (Member # 2902) on :
 
krazy-stang is that with the jug or all motor?
 

---

Posted by 91 5.0 (Member # 1527) on :
 

quote:

---

Originally posted by st5150:
section525- you'll probably be fine with 19's and an adjustable fuel pressure regulator.

---

And a fuel pump
 

---

Posted by krazy-stang (Member # 2194) on :
 
all motor
 

---

Posted by DropTopFox (Member # 1689) on :
 
What gears do you haver in the rear end??? Also ST5150 he has stock ported heads so it's not really doing that much more for him. I'll give you 250 to the wheels. I'd be very interested in dynoing your car right next to mine. What is your compression at. I have basically the same set up except I have 10:1 compression and ported stock stock intake. I would like to see how much the higher compression is giving me but with a more restrictive intake manifold I think we might be damn near identical
 

---

Posted by DropTopFox (Member # 1689) on :
 
oh and I would say low 13's
 

---

Posted by KCmustangboy (Member # 1927) on :
 

quote:

---

Originally posted by st5150:
krazy-stang - As far as your 1/4mile time, it all depends on your driving and launch. Virtually any aftermarket heads/intake/cam on a 5.O will give you enough MPH for 12.9's with enough traction and driving.


section525 - Maybe a more agressive cam, better valve springs (a must regardless), and a higher RPM stall converter is the ticket for you?

---

quote:

---

Originally posted by krazy-stang:
how much horse power and can i expect to the rear with this set up?
65mm tb
24lb injectors
bbk shorty headers
catback flowmaster
pullies
ported stock heads
ported cobra upper and lower
e303 cam
1.6 rockers

---