This is topic mass air sensor in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005241
Posted by 95still5.0 (Member # 2994) on :
 
just found out the problem of what was wrong with my car. I wanted to know if the stock mass air sensor {just the chip, not the whole aluminum piece} from a 87-93 5.0, work well on a 94-95 stang 5.0. can there be any problems?any performance difference? anything? thanx
 
Posted by 50DADDY (Member # 3076) on :
 
Far as i know theyre the the same.Ive got an air meter and sensor from a 95 on my car(93)and ive never had a problem.Hope this helps.
 
Posted by st5150 (Member # 51) on :
 
I've done some testing...... the 94/95 meter will run a bit rich on a fox body. Testing the output voltage of the two MAF's on the same car, the '94/95 MAF consistantly read higher telling the computer there is more air entering the engine than there really is.


The 94/95 MAF's also have a square flange for the air filter housing to bolt up to versus the round hose clamp mount of the '88-93 5.O's so there is a physical adaptation problem as well.
 
Posted by DropTopFox (Member # 1689) on :
 
If you need a conical K&N filter to throw on if you get the 87-93 MAF let me know. I got one I'll give you. [patriot]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com