This is topic Thinken about running a TFS cam in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005194

---

Posted by SteedaGT (Member # 2805) on :
 
I have the Trick Flow twisted wedge heads on my 5.0 and thinken of running the TFS stage one CAm with it, whats your thoughts?
 

---

Posted by LAST302 (Member # 808) on :
 
I ended up with piston slap so be careful and be sure to check all clearances.
 

---

Posted by hidnn.o.s. (Member # 1219) on :
 
I have a performance cam out of a 306 that I would let go cheap. I replaced it with a much milder cam. I will let you know the brand and specifics tomorrow morning if interested.
 

---

Posted by BOUNTY HUNTER VERT (Member # 2754) on :
 
if you are running the stock shortblock with the tfs wedge heads go with a f cam and 1.7 rockers
 

---

Posted by season'd 88 (Member # 169) on :
 
Hey i bet your car will run great with that cam.
Stick it in and report back.
 

---

Posted by cegan (Member # 3185) on :
 
I have CompCam XE274HR, $125.00 if interested, plus a Edelbrock RPM Manifold w/75mm TB for sale. reply with PM
 

---

Posted by 93PONY (Member # 60) on :
 
The XE274 would work great, but it will not pass smog.
 

---

Posted by FasterDamnit (Member # 442) on :
 
I ran 12.2's at 112mph w/ my TFS stage 1 and 1.7 rockers. There are better cams but the price is hard to beat.
 

---

Posted by jmcclesk (Member # 1355) on :
 
I am happy with my trick flow stage one cam.

[ August 22, 2003, 04:43 PM: Message edited by: jmcclesk ]
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com