T O P I C R E V I E W
|
89ex-chp
Member # 1135
|
posted
I just finished a 4cyl to 5.0 swap that I used 2 wiring harnesses for. My problem now is that no power is geting to the starter relay from the ignition. The fuel pump comes on but it wont crank. I tried to jump it but the spark was too weak (battery is brand new). Any idea which wire(s) to look at? I have a chilton manual but the wiring diagrams are like another language to me. Thanks
|
66 AC COBRA of CA PERFORMANCE
Member # 904
|
posted
if u jumped it and it doesnt work still, u have other problems except the swap wiring, are u sure the starter is good
|
Blue Oval
Member # 2548
|
posted
call Jon McCleskey forgot his name on the site but all pm u his #.hes a master mechanic and fixed a simliar problem that i had. good luc
|
st5150
Member # 51
|
posted
This web page should help you out greatly:
http://www.veryuseful.com/mustang/tech/engine/ (check out the wiring diagrams)
|
89ex-chp
Member # 1135
|
posted
Thanks for the replys. Yeah, the starter is brand new, new coil new starter relay. Thats what was driving me crazy. Ill see if I can figure it out with those diagrams and then Ill give that guy a call. Thanks.
|