This is topic wiring problem in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005050
Posted by 89ex-chp (Member # 1135) on :
 
I just finished a 4cyl to 5.0 swap that I used 2 wiring harnesses for. My problem now is that no power is geting to the starter relay from the ignition. The fuel pump comes on but it wont crank. I tried to jump it but the spark was too weak (battery is brand new). Any idea which wire(s) to look at? I have a chilton manual but the wiring diagrams are like another language to me. Thanks
 
Posted by 66 AC COBRA of CA PERFORMANCE (Member # 904) on :
 
if u jumped it and it doesnt work still, u have other problems except the swap wiring, are u sure the starter is good [Confused]
 
Posted by Blue Oval (Member # 2548) on :
 
call Jon McCleskey forgot his name on the site but all pm u his #.hes a master mechanic and fixed a simliar problem that i had. good luc
 
Posted by st5150 (Member # 51) on :
 
This web page should help you out greatly:


http://www.veryuseful.com/mustang/tech/engine/ (check out the wiring diagrams)
 
Posted by 89ex-chp (Member # 1135) on :
 
Thanks for the replys. Yeah, the starter is brand new, new coil new starter relay. Thats what was driving me crazy. Ill see if I can figure it out with those diagrams and then Ill give that guy a call. Thanks.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com