This is topic stock MAF and C&L meter - Help?? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=005003
Posted by TriplePLAY (Member # 948) on :
 
i'm trying to replace my stock MAF with a C&L meter. at first glance, the screws on the stock MAF looked like it could be unscrewed with a torx bit. but the screw had a tit in the middle that kept me from inserting the whole bit. [Mad] i've got a 96 GT- has anyone done this? and what type of tool do i need to get these screws off! if you've done this swap and have the torx bit, may I borrow??

[ August 05, 2003, 10:52 PM: Message edited by: TriplePLAY ]
 
Posted by outlawd94cobra (Member # 265) on :
 
You can buy the torque bit set at Sears or Osh for under $9 dollars. I'd let you use mine but im in Stockton.
 
Posted by TriplePLAY (Member # 948) on :
 
i think these requires the tamper proof torx bit- i hope sears has them. thanks for the offer Stockton is quite far from me-
does anyone else have this bit?

[ August 06, 2003, 09:03 AM: Message edited by: TriplePLAY ]
 
Posted by Glenn (Member # 520) on :
 
where are you located?
 
Posted by outlawd94cobra (Member # 265) on :
 
If we're on the same page (torq screw w/ little nipple in the middle) so you'd need the torq bits with an open middle...... yep, Sears does have them and so does Osh. I just bought another set maybe 2 weeks ago bro'.
 
Posted by TriplePLAY (Member # 948) on :
 
glen- i'm in fairfield right now. you got one?

outlaw- right on bro, i'll swing by sears tonight, unless someone has one that i can borrow.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com