This is topic Its time to put the power to the ground? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004963
Posted by Blownhatch (Member # 167) on
:
5.0 8.8 rearend
Im looking to either upgrade on the 8.8 rear end or buy a 9inch with locker ready to go. Will a 8.8 with after market axles handle 5000rpms.
Posted by 93lx342 (Member # 1793) on
:
you could make 800+rwhp and a 8.8 will take it
Posted by 93lx342 (Member # 1793) on
:
it would cost aound $1200.00 to get the 8.8 built with 9 inch housing ends(c clip eliminators tend to leak),axles(31 spline),and auburn pro or similar differencial.
Posted by turbo302 (Member # 2786) on
:
I'am puting down over 700ftlb with my 8.8 31 splines,locker,welded axle tubes motorsport gears.You do not need a 9inch take a look at my site for more info.
Fueled by Ford Mustang Owners
on CaliforniaFords.com