This is topic good tranny shop in SJ?? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004624
Posted by DarcSteed (Member # 2529) on :
 
need to have the tailshaft seal replaced on a 95 with a stick. done it before but it kept leaking, so to the shop it goes. any suggestions, #'s, any input where to or where to not go, thanx.
 
Posted by st5150 (Member # 51) on :
 
www.moderndriveline.com

Any shop should be able to do that though.
 
Posted by SF Coupe (Member # 1810) on :
 
If you put in a new seal and it kept leaking then your yoke is probably worn and you need a new one or better yet just buy an aluminum driveshaft that comes with yoke and new joints.
 
Posted by White95GT (Member # 1915) on :
 
quote:
Originally posted by st5150:
www.moderndriveline.com

Any shop should be able to do that though.
He only does bench work so if you go to him make sure your tranny is out since you have to drop it off to him. I think his name is Bruce Couture
 
Posted by DarcSteed (Member # 2529) on :
 
i know bruce, he is the t5 guy. he makes all those custom mounts and shit to put a tremec in a 60's mustang and shit like that. i guess i'll jut go to the phone book.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com