This is topic What Cam/Fuel setup? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004247
Posted by Jerm95gt (Member # 1239) on :
 
I'm about to put on edelbrock 6037's, and do a mild cam. I need suggestions for a reliable smog legal cam, also can i get away with just a new fuel pump/fpr and stock 19# injectors? Thanks....fyi i have cobra intake if that makes a difference. I'll probably keep stock maf also...

Thanks

[ May 26, 2003, 05:38 PM: Message edited by: Jerm95gt ]
 
Posted by 93PONY (Member # 60) on :
 
Crane 2031 cam.
1.6 roller rockers.

You'll need at least a 190LPH. But....if you have plans down the line for boost, N2O, or whatever, might as well get the Walbro GSS340 255 Hi-pressure in tank pump. They're only $129.

As for FPR....the best one is the Kirban.
But the $35 ones will also work fine.
 
Posted by Jerm95gt (Member # 1239) on :
 
i got 1.7's already, so the crane over the e303?......and if i get the 190 (no boost in the future) so i don't need the injectors?
 
Posted by Glenn (Member # 520) on :
 
want new valve springs?
 
Posted by Jerm95gt (Member # 1239) on :
 
nah got some thanks
 
Posted by HungryHippo (Member # 537) on :
 
want a FMIS?
 
Posted by Jerm95gt (Member # 1239) on :
 
Anyone else?
 
Posted by GOT 50 (Member # 1960) on :
 
Look at my sig. picked up 12 mph over old best et and mph in quarter mile.. Went from a 90.58 to a 102.38 [Whoo Whooooo!] Oo also have a very mean idle!!
 
Posted by cobraman_1994 (Member # 467) on :
 
your injectors can hold out, but id go pick up some 24's just to be safe. used are around 100 or so [Cool]
 
Posted by HungryHippo (Member # 537) on :
 
want my mac cold air?
 
Posted by siri95 (Member # 2840) on :
 
aye how much are u selling that mac cold air. would it fit.. in my 1995 gt?
 
Posted by Jerm95gt (Member # 1239) on :
 
Like i don't want to be doing anything bad to my car and i don't want it to be a temp thing but if i can get away without new injectors that'd be very nice. But i don't want to harm anything.
 
Posted by Jerm95gt (Member # 1239) on :
 
quote:
Originally posted by GOT 50:
Look at my sig. picked up 12 mph over old best et and mph in quarter mile.. Went from a 90.58 to a 102.38 [Whoo Whooooo!] Oo also have a very mean idle!!
Do your stock valve covers clear??
 
Posted by st5150 (Member # 51) on :
 
With a cam you'll need 24 lbs injectors. With the stock cam, you can probably get away with the stock injectors and an ajustable fuel pressure regulator.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com