This is topic Looking for a 5-Point Roll Cage in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=004166
Posted by Night Ryder (Member # 912) on :
 
Does anybody know where I can find a 5-point roll cage for my 96 vert?I tried summit and they don't have it. [Confused]
 
Posted by Blown Mystic (Member # 476) on :
 
5 point [Confused]
Also its a roll bar, if it were a cage you would be enclosed in it.
I think you want a 4 point with the crossbrace- http://www.maximummotorsports.com/autopower.asp
 
Posted by Night Ryder (Member # 912) on :
 
quote:
Originally posted by Blown Mystic:
5 point [Confused]
Also its a roll bar, if it were a cage you would be enclosed in it.
I think you want a 4 point with the crossbrace- http://www.maximummotorsports.com/autopower.asp
Oops my bad.Thanks
 
Posted by Jeff S (Member # 371) on :
 
What is the reason you want a roll-bar? If it's to be legal for the track the 4 point will do nothing for you.
 
Posted by DementedGT (Member # 1463) on :
 
-
 
Posted by GR40Coupe (Member # 698) on :
 
Look in any mustang & fast ford mag, 5.0 mag and there are always companys that have them.
 
Posted by Night Ryder (Member # 912) on :
 
quote:
Originally posted by Jeff S:
What is the reason you want a roll-bar? If it's to be legal for the track the 4 point will do nothing for you.
When I went to the track recently the told me I need a 5-point roll bar.
 
Posted by John91coupe (Member # 18) on :
 
Actually, a 5 point is NHRA legal as shown in DementedGT's picture though nobody does just the driver's side doorbar. Most companies sell 6 point rollbars (doorbars both sides) but if you just want to install one side you are OK from a legal standpoint.
 
Posted by turbo302 (Member # 2786) on :
 
It sounds like you would be better off going with a 6 point with pull-out door bars, that way when you're driving on the street you can take the door bars out (that's what I have in my Mustang). I would try Maximum Motorsports for that application (whatever you do, make sure you get the bar welded in & bolted in) If you can't find the application you're looking for, I can build you a roll bar (or install one you purchase).
- turbo302 Sheldon
Big Boy Racing Fabrication
 
Posted by Night Ryder (Member # 912) on :
 
Thanks for the replies I appreciate it.
 
Posted by DropTopFox (Member # 1689) on :
 
Check out Maier Racing, they make custom roll bars to fit every car to the driver's needs [patriot]
 
Posted by 1990GT50 (Member # 2119) on :
 
Go to Chris Alston's Chassisworks in Sacramento they have one for you. www.cachassisworks.com
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com