This is topic How Much HP with this combo? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003908

---

Posted by SBSkid (Member # 2560) on :
 
bbk fender wall itake, 75mm mass air, 65mm TB, TB spacer, Cobra manifold, 1/4 manifold spacer, scorpion roller rockers, e303 cam, Under drive pullys, 24lb injectors, bbk shorty headers, off road H, and Flows. Have msd and little stuff like that.
 

---

Posted by st5150 (Member # 51) on :
 
A guy here made 250 rwhp with a similar combo to what you listed, but that's the high end. 235 rwhp is more typical/average for that setup. That combo is begging for some goof flowing aftermarket cylinder heads.
 

---

Posted by 1 FLy50 (Member # 2425) on :
 
...

but thats a very nice combo =)

[ April 28, 2003, 09:13 PM: Message edited by: 1 FLy50 ]
 

---

Posted by 88gt (Member # 579) on :
 

quote:

---

Originally posted by 1 FLy50:
250? lol you should be sittin in the high 300s low 400s even..

but thats a very nice combo =)

---

quote:

---

Originally posted by 1 FLy50:
250? lol you should be sittin in the high 300s low 400s even..

but thats a very nice combo =)

---

Just curious but what then would a Supercharged 96' Saleen have, with a 99' motor, 10lb vortech supercharger, 87mm MAF, 42lb injectors, 70mm TB, autologic chip, bbk longtubes, off road h, and borla mufflers be pushin'????
 

---

Posted by 1 FLy50 (Member # 2425) on :
 
umm isnt stock 302 pushin about 225hp?
 

---

Posted by 1 FLy50 (Member # 2425) on :
 
i thought i read something about gt-40 heads
 

---

Posted by Blown Mystic (Member # 476) on :
 
but still low 400????????? not possible with GT40 heads, unless ur talking FWHP
 

---

Posted by 1 FLy50 (Member # 2425) on :
 
yea...

<--to much vodka
 

---

Posted by Chico Stang (Member # 801) on :
 
Yea...and they are talking about rear wheel horsepower, you are talking about engine horsepower!
 

---

Posted by BOUNTY HUNTER VERT (Member # 2754) on :
 
Ive personally seen mid 400s N/A through stage 3 ported gt40 irons
 

---

Posted by shade-tree (Member # 298) on :
 
GT-40 irons would be the perfect complement to this posters combo, I bet it would move him from ~235 rwhp to 260 rwhp or maybe even 265 or so.

Enough for mid 12's with hook in a full weight GT
 

---

Posted by 66 AC COBRA (Member # 904) on :
 
if no heads, i say stick with the 19# injectors, i dont think the 24's are needed, but that is just me, i guess 24's leave room for improvement
 

---

Posted by PeNiNsula302 (Member # 1061) on :
 
like sawson said, that combos begging for some good heads!! With that alone i expect around 245-260 to the rear wheels, i mean shit i was at 225 with bbk shorty's, off road x, 2 chambers, 3:73's, pullies, cold air, msd ignition/coil, and even stock timing . Personally i wouldnt even do it without the heads man, why not save some $$ and get it all done @ one time with significant more power than with stock heads, just my .02 .
 

---

Posted by PeNiNsula302 (Member # 1061) on :
 

quote:

---

Originally posted by 66 AC COBRA:
if no heads, i say stick with the 19# injectors, i dont think the 24's are needed, but that is just me, i guess 24's leave room for improvement

---

agreed there also
 

---

Posted by 66 AC COBRA (Member # 904) on :
 
if u have to use the stock heads, atleast do a little home port/ clean up to freshen them up just a little

www.fordmuscle.com has a good article on porting e7's
 

---

Posted by DVblownS281 (Member # 2458) on :
 
i say 250. i wanna know the results
 

---

Posted by 99gt-UJSTLST (Member # 584) on :
 
with a good tune maybe 240rwhp
 

---