This is topic Can slotted rotors get resurfaced? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003766

---

Posted by MiniMEE (Member # 1009) on :
 
Well, anyone tried and where did you go? How was the result? Is there anywhere in Fremont I could go to get this done?
 

---

Posted by 66 AC COBRA (Member # 904) on :
 
yes, they can be turned, dont know of anyplaces in fremont but any brake shop should be able to do it (as long as the rotors are in specs)
 

---

Posted by Blown Mystic (Member # 476) on :
 
i have heard there are a FEW that cant be turned, but then agian im a drunk
 

---

Posted by hidnn.o.s. (Member # 1219) on :
 
I didn't think they could be at all, but had no personal experience.
 

---

Posted by 66 AC COBRA (Member # 904) on :
 
if anyone reads this with drilled rotor, those can also be turned, i turned my own drilled rotor in auto shop a year ago, so it must be easy if i can do it

and by the way, when u turn slotted rotors, the slots just get smaller obviously , so they dont work quite as effectively but it beats getting new rotors

[ April 17, 2003, 12:45 PM: Message edited by: 66 AC COBRA ]
 

---

Posted by silvergt99 (Member # 1607) on :
 

quote:

---

Originally posted by Blown Mystic:
i have heard there are a FEW that cant be turned, but then agian im a drunk

---

Me too!
 

---

Posted by D's 00Z28 (Member # 2693) on :
 
How many times can the stock LS1 rotors be resurfaced before they are no good? I've already had them resurfaced once but I don't if I should do it again or just get new rotors?
 

---

Posted by Blown Mystic (Member # 476) on :
 
there is a minimum thickness. you would have to look it up.
 

---

Posted by racercosmo (Member # 1864) on :
 
Minimum thickness for Cobra rotors is 26.1mm which is 1.02".
 

---

Posted by lilstangy (Member # 2183) on :
 
i think the machine shop at total auto supply does it. what part of fremont are you at.
 

---