This is topic b303cam in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003673
Posted by Rally1 (Member # 2537) on :
 
anybody know if a b303cam would work good on a mild engine. i got full length headers h pipe flows cold air underdrive pullies smog eliminator 3.73 gears.
 
Posted by Fast477Mach1 (Member # 2559) on :
 
I havent had a 302 car for a long time but I was always told that the stock cam works great for awhile and you might just get less out of one that big
 
Posted by st5150 (Member # 51) on :
 
Its worth about 1 MPH on a stock motor. There are probably several better ways you can pick up 1 MPH right now.
 
Posted by KCmustangboy (Member # 1927) on :
 
quote:
Originally posted by st5150:
Its worth about 1 MPH on a stock motor. There are probably several better ways you can pick up 1 MPH right now.
He is right, wait and do a bigger cam with your heads and intake combo. There are lots of other ways to get 1mph. I know of a good free one! wait for the right tail wind. Don't tell anyone about that it's my little sercet [Wink]
 
Posted by 91 5.0 (Member # 1527) on :
 
I believe that cam has alot of duration and little lift. Not good for a stock motor. Correct me if im wrong.
 
Posted by 92coupe (Member # 1957) on :
 
with little things like that wi wouldnt really bother with a cam. it will just rob from your low end torque. trust me i had the e303 cam on a stock motor with headers and o/r h-pipe, plus the motor was jsut rebuilt and that thing felt a lot faster once i put a stock cam back into the motor.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com