This is topic Low Coolant light but its full in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003517
Posted by The Rick (Member # 327) on
:
Eh, this is kinda bugging me. The coolant level in my car keeps testing like its full if not overfull according to the little jug (you see how techinical I am)
I tested it when "hot" and when "cold" and both times it was at least at the line if not over.
Any ideas?
Posted by The Rick (Member # 327) on
:
Also, even with the stock radiator and the H/C/I it still runs just a little hotter then when it was stock. Of course its not been hot or anything and I plan on getting a new radiator very soon but I doubt its low?
Posted by rokcrln (Member # 2536) on
:
I have the same problem with my light staying on. Any sugestions?
Posted by IKE (Member # 435) on
:
Hell the plug on my over fill bottle is not even hooked up!! Disconnect it or is it even the same??
Posted by 93PONY (Member # 60) on
:
Clean the terminals. The water/anti-freeze in the overflow tank corrodes the terminals over time & it will start giving false readings. Simply clean all the gunk off.
Posted by Quick 88LX (Member # 1950) on
:
get a 180 thermo while your at it if you haven't already. That will help a bit.
Posted by rokcrln (Member # 2536) on
:
quote:
Originally posted by Quick 88LX:
get a 180 thermo while your at it if you haven't already. That will help a bit.
Now how will getting a 180* thermo help with the low coolant light?? I have cleaned the conections and that has not helped. Any more ideas?
Posted by 93PONY (Member # 60) on
:
quote:
Originally posted by rokcrln:
quote:
Originally posted by Quick 88LX:
get a 180 thermo while your at it if you haven't already. That will help a bit.
Now how will getting a 180* thermo help with the low coolant light?? I have cleaned the conections and that has not helped. Any more ideas?
The terminal that sits IN the water in the overflow canister?
The fork like thing with 2 metal tabs ~1 inch apart? This is what needs to be cleaned.
Posted by azl (Member # 2112) on
:
the light comes on for only 1 reason, that is if the circuit for that connection isn't closed. that means either the plug going to the top of the tank is broken or dirty or the leads into the bottom of the tank are broken or dirty. try putting a paper clip in the cable that goes from the tank to the computer, then see if the light goes out
Fueled by Ford Mustang Owners
on CaliforniaFords.com