This is topic AOD in 67 stang in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=003321

---

Posted by 67stang12s (Member # 2314) on :
 
im putting in a AOD in my 67 stang with a 289 but will soon be united with a 5.0 roller block(thats almost done)
what parts do i need? and can i get them from?
or is there a shop that has experience doing this that anyone knows?
 

---

Posted by tomstir (Member # 389) on :
 
www.windsorfox.com
 

---

Posted by street_illegal_stang (Member # 1554) on :
 
i know you have to get a different cross member and shorten up the drive shaft like 1 1/4"
and a few other things.
 

---

Posted by Jimbo (Member # 1456) on :
 
windsor-fox is a good place for info. Youll need a crossmember(windsor fox sells em), a TV cable(Lokar sells those), a flexplate w/ the old 28oz balance that will bolt to the aod converter(B&M sells those), a shifter(an aftermarket one or getting an adaptor for stock) and as was already said you need to shorten the driveshaft(might have to change the yoke too). Hope this helps
 

---

Posted by tomstir (Member # 389) on :
 
I have the Lokar cable new in box if you need it.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com