This is topic The E-303 in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002936

---

Posted by 88GTstunna (Member # 2301) on :
 
Can you all tell me what is good and bad about this cam? I just got one.
 

---

Posted by Black94 5.0 (Member # 655) on :
 
Its better than stock...
 

---

Posted by 93PONY (Member # 60) on :
 
Good:
Better then stock
Can be used with weak valvesprings
Passes smog
Cheap

Bad:
Idle quality
Slow ramp-rates so there's a LOT of power left on the table.
Generic design (220/220 110LSA/110ICL) that only works OK with most combos. Hence the idle problems.
Not really ment for an EFI motor. Would work much better in a Carb setup.
 

---

Posted by shade-tree (Member # 298) on :
 
nearly as magical as the B-303 cam.

any car I've listened to with the E-303 cam has a pretty sweet idle, IMHO.
 

---

Posted by Cobra5.0Jeep (Member # 1482) on :
 
I think my idle sounds badass with it. i have had some problems with the idle but i don't think its because of the cam. I've felt the HP increase especially when i get up around 3,000RPMs it starts to pull a lot harder.
 

---

Posted by hidnn.o.s. (Member # 1219) on :
 
Seen many idle problems with that cam. Good luck.
 

---

Posted by mustangcam302 (Member # 2315) on :
 
IMO...like all alphabet cams, it old technology....much better options out there with better grinds.
 

---

Posted by WANARNM (Member # 587) on :
 
You could of gone with a TFS stage 1 or 2. Those are way better then the alphabet cams IMHO.

But anything is better than stock i say.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com