This is topic Installation problem with h-pipe, hanger interferes with speedo cable. in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002692
Posted by Fox89GT (Member # 1539) on :
 
Does anyone have a problem with one of the h-pipe hanger interfering with the speedometer cable connector going into a T-5 tranny? It seems that the hanger ends just where the plug is and bends the cable almost to 90 degrees. I did cut the rubber groumet that the hanger goes into a bit and that relieved it somewhat but thats about it. Should I worry about this bend or is it okay the way it is? [Confused]
 
Posted by 91 5.0 (Member # 1527) on :
 
My Tremec is like that too.
 
Posted by Fox89GT (Member # 1539) on :
 
So, what did you do? Does your speedo still work?
 
Posted by 91sleeper (Member # 779) on :
 
Why do you need hangers on your h-pipe. My x-pipe is hanging by the rear mufflers and the headers. It reduces inside car vibrations as well. Just cut the h-pipe hangers off.
 
Posted by cobraman1994 (Member # 467) on :
 
i had it like that on my 94 cobra. it sat nice and snug with no hangers. on my h pipe, and both the x pipes i had
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com