This is topic BBK fierwall adjuster help in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002588
Posted by Mustangfiv0 (Member # 2231) on
:
i have the bbk fier wall adjuster on my car, and my clutch was slipping, so i adjusted the fier wall adjuster, and the clutch does not slip as much as it did, i adjusted it like 2 turns, am i suppost to now adjust the pedal also?? I love how the stiff ness feeling has came back to my clutch pedal, was 2 turns too much?? the clutch is abought 7 months old, i think it was slipping due to an oil leak, and some oil got into the clutch area.
Posted by Mustangfiv0 (Member # 2231) on
:
fire* sorry abought the spelling just woke up
Posted by Quick 88LX (Member # 1950) on
:
If you haven't changed anything else about your clutch cable then lift up on the clutch pedal, or pull back whatever, and that will adjust your pedal. But a slipping clutch isn't your cables fault if you have replaced it. Time for a new clutch!
Posted by Black94 5.0 (Member # 655) on
:
How far off the floor does your clutch engage?..Did you buy the kit W/ cable & quadrant?... Check the clutch fork and cable under the car... When you are NOT pressing the pedal there should be at least 1/8th of an inch of slack between the fork and the end of the cable(The more slack the higher the pedal has to go for the clutch to engage)...Hope I could Help
Fueled by Ford Mustang Owners
on CaliforniaFords.com