This is topic Tranny hopps up and down after installing an h-pipe with out the hangers what to do?? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002575

Posted by Mustangfiv0 (Member # 2231) on :
 
i just installled an off road h-pipe on my car, and the h-pipe did not have the hangers on it, since ive installed it, when ever i hit a bump, it seems my tranny will bounce up and down, will this eventually mess my trann or something up?? should i even wory???
 
Posted by Clark (Member # 1076) on :
 
Um, Maybe your old H pipe was supporting your Tranny, That's NOT good. Might want to check that out sometime. [Eek!]
 
Posted by 1sicgt (Member # 714) on :
 
Maybe your tranny mount is shot? Did you inspect it?
 
Posted by Mustangfiv0 (Member # 2231) on :
 
no idea, just when i hit a bump, i can feel the stick hop up and down, like the tranny is hopping, what should i imspect?
 
Posted by Black94 5.0 (Member # 655) on :
 
Sound's like a tranny mount to me!Did you loosen any bolts on the crossmember to get you H-pipe off?...if so tighten them! Did you take out the original hangers from under the trany mount?...If so put it back! [Wink]
 
Posted by Mustangfiv0 (Member # 2231) on :
 
nope i didnt lossen any of that stuff, ill probly just go and itghten every thing tommorow, hopfully thatll stop it, i did an aod to t-5 swap, can any of you help me with a question for my clutch, aim me at supra1on1 , i need help with a slipiing clutch and i want to know how to adjust it, with the bbk clutch adjuster, should i tighten up the cabel more??
 
Posted by Black94 5.0 (Member # 655) on :
 
When adjusting your clutch cable you want to make sure that when your foot is NOT on the clutch pedal that there is still a little slack in the cable. Check this by going under the car and making sure the end of the cable is at least 1/8th of an inch AWAY from the clutch fork...
 
Posted by 87Saleen (Member # 1549) on :
 
do you hear a clicking type noise when you shift? check the motor mounts as well, I had the same problem.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com