This is topic Questions about Canton Products in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002251
Posted by Yellow94GT (Member # 431) on :
 
Has anyone on here delt with them before?

I'm in the market for a girdle, windage try, pan, pick up, and pump. Canton makes all these products so I'm considering going through them just for the fact that I know everything will work together.

Anyone have any stories to tell? [patriot]
 
Posted by Pro50Eric (Member # 2065) on :
 
Never heard any bad things about them. I had a canton pan a while back on my motor..but got a good deal on a Stefs aluminum pan. But they make good products. [Smile]
 
Posted by 93PONY (Member # 60) on :
 
I bought Jeff's old Canton pan & pickup. Bad weld caused a leak in the rear that drove me nuts till I found it!
The fit is.....interesting. The main problem with the Cantons is the fitment around the Front & rear mains. Special attention should be paid to these areas during install. I had the comon problem of a 1/4 inch space at the corners. The pan is fairly flexible so I was able to bend it into place.
If I ever get another pan, it'll be a Moroso.

BTW, look at Trick Flows tool-steel girdle.
 
Posted by Milesblown03 (Member # 27) on :
 
I had a Canton pan on my 351c in my old capri. seemed to fit fine, no leaks, and the price was decent. No complaints here
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com