This is topic Idle too high in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002165
Posted by 89lx (Member # 1703) on :
 
Took my TB and EGR spacer off to clean them. Now the Idle is about 300 RPM high. Can't see/hear a vacuum leak. All bolts are tight. Tightened and regreased the "trash can" connectors on the back of the intake. Checked the connections and cleaned the IAB valve. Still the same.

What's up? [Confused]
 
Posted by st5150 (Member # 51) on :
 
When ever you take off the TPS and/or throttle body off, you should reset your idle screw and TPS setting.
 
Posted by GHOSTDOG (Member # 522) on :
 
i had this problem also all i did was clean my mass air meter and disconect the battery for 5 minutes and it reset the throttle perfect
 
Posted by MR GO FAST (Member # 2088) on :
 
HAD THAT PROBLEM ONCE. I USED AN IDLE AIR ADJUSTER WHICH IS MOUNTED BETWEEN THE THROTTLE BODY AND THE AIR BYPASS VALVE. YOU CAN BUY ONE FROM FORD.
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com