This is topic 5 lug conversion in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=002125
Posted by 99gt-UJSTLST (Member # 584) on
:
I was goin to do the coneversion on my 89coupe but wanted to now what year ranger do I need to get the axles from also what year lincon do I need to get the roters from
thanks
Posted by fiveohmike (Member # 1437) on
:
Get the rear drivers side axels outta an 88 (if i remeber correctly) Ford Ranger. It has to be the Drivers side rear and you need 2. Also outta of an 89ish Lincon Mark VII get the rotors
Hope this helps
Mike
Posted by 99gt-UJSTLST (Member # 584) on
:
really why wont the pasanger side work
so I need to get 2 driver side axles from a 88 ranger
Posted by fiveohmike (Member # 1437) on
:
Ya the passenger side axels are shorter than the drivers side rear........you need to find 2 different rangers and pull the Drivers side rear axels. Thats where i got my axels from
Mike
Posted by Mario92 (Member # 381) on
:
What are you going to use for rear calipers or are you just going 5 lug drums in the rear?
Fueled by Ford Mustang Owners
on CaliforniaFords.com