This is topic lets play guess that plug in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001810
Posted by Norcalbmxer (Member # 235) on
:
ALl of these from an 85 Gt:
#1 Located on the passnger side between the battery box, and the strut tower. 3 wires coming out of it.
#2 Im trying to figure out what the box thing is. It has one red wire that goes to the clip shown below it, which attaches to the start selinoid, and a black wire that goes to ground....but WTF is that rectangle thing....
#3 These 3 plugs are located on the drivers side, in front of the strut tower. a close up is below this pic...
closeup of #3
if you guys need anymore info on any of these let me know and I will get what i can. Thanx
Posted by fiveohmike (Member # 1437) on
:
The closeup pic # 3 --- The black one on the right looks like the connector that goes to the EVP Sensor on the EGR Valve
Mike
Posted by shade-tree (Member # 298) on
:
that first one sorta looks like the EEC-IV test port (where you plug in the code scanner).
nice rat's nest!
Posted by Norcalbmxer (Member # 235) on
:
you guys are awesome.....still no responses from corral, or anywhere else....
tracking it down, on the schematic, its looks like that is the EVP sensor plug, thanx Mike!
and shade tree, ive found both of the test ports for this car, any other guesses as to what it could be??
Posted by st5150 (Member # 51) on
:
Is #2 ceramic? Hard to tell from that picture.
Local pick-n pulles usually have a 85GT or two around that you can go take a peep at.
Posted by Norcalbmxer (Member # 235) on
:
quote:
Originally posted by st5150:
Is #2 ceramic? Hard to tell from that picture.
Local pick-n pulles usually have a 85GT or two around that you can go take a peep at.
yeah #2 is some type of hard material......eitehr ceramic, or very hard plastic...it has like cloth-tape wound around it / in it......its connected correctly, I just have NO IDEA WTF it is, and i would like to get rid of it if I can.....
Posted by Wolfie351 (Member # 651) on
:
The top pic looks like the plug that goes into the electronic regulator, mine's black though so I could be wrong. In pic 3 & 4, the black two prong connector goes to the throttle positioner on the holley 4180. For when you turn on your a/c it gives you a faster idle. The other two goes into a harness which was very hard for me to follow but it crossed over the front of my engine to the passenger side of the car. I was trying to match the wire colors, but after 18 years, all the wires are the same grimey color.
Fueled by Ford Mustang Owners
on CaliforniaFords.com