This is topic Got my heads, intake and cam! Now for..... in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001731

---

Posted by sskiller (Member # 1564) on :
 
I got my Trick flow twisted wedge heads, Holley Systemax II and an E 303. With that stuff and my k&n, flowmasters, and headers what could I put down at the track with some bfg g-force ta's and what about hp? Now I'm thinking mass air, tb and injectors.
 

---

Posted by shade-tree (Member # 298) on :
 
19# injectors are a bit too small for that combo, especially at the fuel pressure needed to run it. I'd say go 24# or 30# if you stay NA, otherwise 36 or bigger for a power adder.

that's an easy 300+ rwhp combo, although that cam might not get you there. Swap the cam to a TFS stage 1 or some other proven bolt-on cam.
 

---

Posted by 93PONY (Member # 60) on :
 
Install the E cam 4-6 degrees retarded to get the upper RPM HP out of your heads/intake.

The TFS stage 1 is slightly larger than the E, although it is a split profile. If you do get another cam, consider spending another $100 on a custom grind. You'll easily pick up 30RWHP over either cam.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com