This is topic Kenne Bell 6-7 psi? What size Inj & Mass air? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001583

---

Posted by Dee (Member # 1502) on :
 
I have a 302 shortblock that I just purchased from Central Coast Mustangs basic block with an E303, If I run a Kenne Bell charger on this motor what size injectors and Mass air do I run? If anyone has ran one of these blowers any help would be great.

Thanks
Dom
 

---

Posted by st5150 (Member # 51) on :
 
What heads? Do you plan to run an FMU? Are you set in stone on getting the Kenne Bell over a Vortech?
 

---

Posted by 90LX (Member # 1487) on :
 
He is going to use Edelbrock performer heads and no FMU. He already has the Kenne Bell and heads. He just neads to know what size injectors and throttle body. The kits says use stock parts but that seems kinda lean for a blower.
 

---

Posted by st5150 (Member # 51) on :
 
That combo will probably make somewhere in the lower to possible mid 300 rwhp range. 330 if I had to take a guess. 36 lbs injectors will work nicely with out an FMU.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com