This is topic 18x10 wheel.????? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001579
Posted by javier (Member # 547) on :
 
i know its not to much of a tech question.
but will a 18x10 wheel rub in the rear.

oh yeah my car is lowered 2 1/2 inches all around.
 
Posted by Roush2960 (Member # 672) on :
 
You will have to roll the inner fendor lip and have a very stiff suspension. But thats what Roush now ships out on the S2 and S3's and they have a 1.5 - 2.0 inch drop in the rear. LOL

./Matt
 
Posted by TRY2PAZ (Member # 97) on :
 
Javier,
What wheels are you looking at? My wheels don't rub at all, but my quarters where rolled from the factory. If you don't go any bigger than 295, you should be ok. It matters on the back spacing. If you buy saleen or roush wheels, you should be kool. Will you have the wheels by foster's?
 
Posted by javier (Member # 547) on :
 
there Saleen wheels.

18x9 up front and 18x10 in the back.

I'll have them by foster freeze..
. [burnout]

[ September 06, 2002, 12:28 PM: Message edited by: javier ]
 
Posted by 00KNIGHTMARE (Member # 1010) on :
 
i have 18X10's in the back with a 2" drop and 7/16" wheel spacers and mine dont rub. i have a 3" drop in the front and no rubbing there either. btw i thought you had 18" y2k cobra r's. not wide enough? good choice on saleen rims they looked awsome on mine before the body kit. [Big Grin]
 




Fueled by Ford Mustang Owners
on CaliforniaFords.com