This is topic Clutch slips after big burnout? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001245
Posted by Camara90 (Member # 134) on
:
My spec stage 2 seems to slip after big burnouts after consecutive runs. Is this normal? It is really starting to piss me off!
Posted by shade-tree (Member # 298) on
:
do you "stay in the burnout" after your tires begin to hook up-- you know when they start to grab do you force the burnout to continue with a little brake pressure or are you on a linelock and you can't tell? if so that's the problem. The moment they start to grab you've got to get out of it or you are wasting your clutch. Do you "dry hop", that doesn't help either if so.
Posted by Camara90 (Member # 134) on
:
I have been doing second gear burnouts, while they are wet. THey really didnt start to grab, and I am just holding the brake down, no linelock yet.
Posted by shade-tree (Member # 298) on
:
well, you are apparently glazing your clutch so I'd back off on the burnout a little if I were you. Maybe just go until you get 'wisps' from both tires.
Posted by 93lx306nos (Member # 1001) on
:
i killed my stage 3 in 6000 miles.i am not to happy with spec clutches.my car only makes 320rwhp.the springs broke and got wedged between the pressure plate and disc.also when i took it out the disc was shot.
Posted by on
:
Fueled by Ford Mustang Owners
on CaliforniaFords.com