This is topic bullit intake porting who does it in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001193

---

Posted by 99gt-UJSTLST (Member # 584) on :
 
any know who does good port work on bullit intakes and how much they charge

I have just bought my self a bullit intake i want to get it ported but dont know who does it
 

---

Posted by 2000BlackGT (Member # 283) on :
 
did that guy ever finish the other intake?
 

---

Posted by 91GR40LX (Member # 1329) on :
 
If your refering to me, we did not complete it yet. It is actually down at Griggs getting a fuel cell and finishing the install of aftercooler and rerouting the EGR tube. We actually had sent the intake to Extrude Hone. They told us 5-7 day turn around. What we found out a month later was they were trying to build the right plate to fit it, and broke it in the process. I don't know if they have corrected the problem yet, but my cobra intake is like night and day on my 5.0. The bullet actually looks fairly simple to clean up as far as casting flash. it shouldn't need much more than that because the gasket are almost the same size all ready. I do have sanding disks that work and have had my share of porting heads, intakes and t-bodies. It isn't difficult.
 

---

Posted by 99gt-UJSTLST (Member # 584) on :
 

quote:

---

Originally posted by 2000BlackGT:
did that guy ever finish the other intake?

---

quote:

---

Originally posted by 91GR40LX:
If your refering to me, we did not complete it yet.

---