This is topic shift kit and gears in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001174
Posted by slow&poor (Member # 961) on
:
I already have a trango shift kit in my car and I was wondering if I will have to modify it when I get gears put in.
Posted by sic91sleeper (Member # 779) on
:
No you will not have to modify the shift kit at all.
What gears do you plan on putting in?
Posted by FasterDamnit (Member # 442) on
:
Bet you will. LikeIke had to. The techs at TransGo can tell you what valve to modify in the valvebody (just using a specific drill bit) so it doesn't shift into OD whle you are in D. Put the gears in first to see if it needs the change.
JL
Posted by slow&poor (Member # 961) on
:
I was planning on putting in 3.73 gears
I really don't want to modify the valvebody again because I basically just installed the shift kit and I don't want to re-do it.
Posted by sic91sleeper (Member # 779) on
:
quote:
Originally posted by FasterDamnit:
Bet you will. LikeIke had to. The techs at TransGo can tell you what valve to modify in the valvebody (just using a specific drill bit) so it doesn't shift into OD whle you are in D. Put the gears in first to see if it needs the change.
JL
He has a 92 mustang. It will only switch into Overdrive if he pushes the shifter in that position. If you leave it in Drive then it will only shift up to third gear.
Fueled by Ford Mustang Owners
on CaliforniaFords.com