This is topic What do you think about this combo??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001149

---

Posted by HAD A RED90GT (Member # 520) on :
 
Trick Flow Street Intake port matched
AFR165cc's
70mm T/B
73mm MAF
K&N Air Filter
1.7 Roller Rockers(Should I get a cam?)
Pullies
Full Exhaust
All stock Bottome end, and what else should I get if I am missing out anything else?
 

---

Posted by 93PONY (Member # 60) on :
 
Definately get a custom ground cam!

An edlebrock intake will also work quite well.

3.73's are a must as well.
 

---

Posted by shade-tree (Member # 298) on :
 
I think the edelbrock performer would be perfect, or possibly (depending on cam and application the RPM). I never hear bad things about the holley intake either!
 

---

Posted by Glenn (Member # 520) on :
 
Hear anyhting bad about the TFS Street Intake?
 

---

Posted by AaronC (Member # 86) on :
 
Get the Edelbrock intake. Too many AFR/Edelbrock/custom cam combo's out there making tremendous power and running solid ET's to mess around. AFR's website also lists the Edelbrock intakes as a good match to their heads. Look to Ed Curtis of FTI or Brian at Hi Tech for a custom cam.
 

---

Posted by Glenn (Member # 520) on :
 
How much was your cam?
 

---

Posted by 93PONY (Member # 60) on :
 
Custom grinds are $295.
It's really a bargan for what you get out of 'em.
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com