This is topic MAF Q??? in forum Tech Talk at Northern California Ford Owners  .


To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=001015

---

Posted by sikkstang (Member # 1210) on :
 
Its me again wit another question. I bought a 70mm throttle body. Do I need to get a different MAF or am I fine with wut I got in there now

Thanks
Alex
 

---

Posted by ray95 (Member # 752) on :
 
With your stock setup you don't need to get a new MAF right now. What other mods do you have? Gears, pullies, exauhst? Need some more info.
 

---

Posted by sikkstang (Member # 1210) on :
 
I have a mac intake, i will put in my pullies soon, i got flows and 373s
 

---

Posted by fiveohmike (Member # 1437) on :
 
You dont need to get a MAF but it would be a good idea to get one just to take care of it now.......any future mods that start increasing air flow will start to see a restriction....I would just do it so you never have to worry about the sensor again.....my .02 cents

Mike
 

---

Posted by sikkstang (Member # 1210) on :
 
wut size would be the best
 

---

Posted by 93PONY (Member # 60) on :
 
You will not gain much from a new MAF for the price.
Best $$$ for HP mods are Pullies & gears (4.10s).
 

---

Posted by saleen00925 (Member # 1302) on :
 
A new MAF will be tough to install with the MAC, some sawing and new tubing will be needed.

-adam cate
00-925
 

---

Posted by fiveohmike (Member # 1437) on :
 
FOr size if your gonna get it I would go with the 73 for a N/A setup or for a forced induction/nitrous setup i would get the 76mm that should be plenty big and make sure it is calibrated to whatever size injectors you have on now.

Mike
 

---

Fueled by Ford Mustang Owners
on CaliforniaFords.com