This is topic help getting off pin stripe!!! in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=000529
Posted by STANG'N IT (Member # 1099) on
:
someone give me a hand. i got tan pin stripe on my stang. i can take a razor i guess to it bu ti don't want to. adn then after i get it off what about that shit that's still there hwere the pin stripe was. hook it up peeps. pleease
Posted by Clark (Member # 1076) on
:
get a hair dryer
and it will get looser and easier to take off
Posted by ScuEleanor (Member # 785) on
:
Punk5.0Slow- read my combo again...I said already that solid lifters would have to be adjusted...I have roller lifters and roller rockers...roller lifters don't need to be adjusted because they are attached...
Posted by ScuEleanor (Member # 785) on
:
sorry wrong post...
Posted by STANG'N IT (Member # 1099) on
:
crack head
Posted by POONSTANG (Member # 79) on
:
Easy....either use a hair dyer or a heat gun (which works much better), a plastic squeege, rubbing alcohol, and then something like a Meguire's paint cleaner. If using a heat gun be careful because of the amount of heat it gives off, and wear gloves so not to burn yourself. Using a sharp small plastic squeege is better because you will be less likely to mar or damage the paint like with a razorblade and it won't rip the pinstripe like a razorblade either. Use the rubbing alcohol afterwards to clean the goo off and then run some Meguire's paint cleaner over it..wax and done!! Hope this helps
Posted by st5150 (Member # 51) on
:
I like to use BBQ lighter fluid to rub any sticky gunk off.
Fueled by Ford Mustang Owners
on CaliforniaFords.com