This is topic ARE PULLIES WORTH IT..? in forum Tech Talk at Northern California Ford Owners .
To visit this topic, use this URL:
https://californiafords.com/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=6;t=000495
Posted by STALLION98GT (Member # 867) on
:
I want to install pullies on my car..but I heard that its not really worth it.cause it does NOT re-charge the alternator that much. I also have a system in my car. I mean..can you really feel any HP out of this..? 
Posted by 89hatchback_lx (Member # 587) on
:
Pullies are a best thing to spend money on. I felt them when i installed. 
Posted by TRY2PAZ (Member # 97) on
:
Do it. Best bang for the buck
Posted by yesIdid (Member # 58) on
:
Steeda pullies w/the timing adjuster!!!! ![[dance]](graemlins/dance.gif)
Posted by HWRDCUR (Member # 1094) on
:
DEFINETLY WORTH IT!!!
Posted by Black94 5.0 (Member # 655) on
:
do it. best bang for buck!....dont forget the "pulley puller" for the crank & impact wrench for the alt.
Posted by sic91sleeper (Member # 779) on
:
I put Aluminum BBK Underdrive pulleys on my car and i felt a lot of a power increase. I have Two Twelves and sometimes i do have to watch my volt gage but if you are that worried about the volts than just leave the alternator pulley off and install the crank and water pump pulley instead.It spins my crank so much quicker!
Posted by STALLION98GT (Member # 867) on
:
does that mean the stang will rev quicker..?
Posted by Clark (Member # 1076) on
:
I was thinking about getting some for mine, But I heard that your car will overheat.
Posted by st5150 (Member # 51) on
:
Its probably the best bang for the buck mod you can do. I have driven about 60,000 miles with underdrive pullies and haven't had any problems with heating. If your car over heats with underdrivepullies, then you have issues elsewhere. As for the battery charge, just leave the stock alternator pully on if the underdrive one is larger.
Posted by 98StangPower (Member # 518) on
:
quote:
Originally posted by Black94 5.0:
do it. best bang for buck!....dont forget the "pulley puller" for the crank & impact wrench for the alt.
Harmonic Blanacer is another name for Pulley Puller 
Posted by on
:
Posted by on
: