T O P I C R E V I E W
|
91redmustang
Member # 10019
|
posted
Im in the process of install one on my 88 notch and wanted to know if this is somewhat correct? Going to be using a 75 amp relay with a 150 fuse and 10 gauge wire. Still not sure what controller and temp sensor to use. which ones are you guys using?
|
2stang
Member # 4237
|
posted
Check out dccontrol.com.
|
VENOMUS PONY 5.0
Member # 7785
|
posted
i just got one to... is there like a step by step diagram for installation.
|
Blind
Member # 3052
|
posted
http://www.dfwstangs.net/tech/markviii_fan/markviii.html
personally I ran the stock fan relay from a mark8, with 10awg wire for the power to the fan and from the relay to the battery, and 18awg from the relay to the temperature switch I installed on the thermostat housing.
|
91redmustang
Member # 10019
|
posted
Here is the one I am going to use... http://home.comcast.net/~smithmonte/Auto/MarkVIII_Fan.htm
|
91redmustang
Member # 10019
|
posted
And here is a 70 amp relay kit I was told would also work. I may end up using the one from the mark 8 like blind has http://www.painlesswiring.com/webcatalog/largeview.php?SearchField=30100
|
Blind
Member # 3052
|
posted
btw you can mount the mark8 fan inside the stock foxbody fan shroud for a cleaner look - http://www.socalstangs.com/forums/showthread.php?t=31066&highlight=fan
|
Als50
Member # 6003
|
posted
Lose the inline fuse and or circut breaker.
|
91redmustang
Member # 10019
|
posted
quote: Originally posted by Blind: btw you can mount the mark8 fan inside the stock foxbody fan shroud for a cleaner look - http://www.socalstangs.com/forums/showthread.php?t=31066&highlight=fan
Is there a way you copy and paste... you have to be a member to see it
|