Author
|
Topic: Pushrod Length? Lil Long or Lil Short?
|
ItzStock
¯
Member # 9665
|
posted
Measured my pushrods and found out i need a 7.875in pushrod... I am having trouble finding someone who sells that length. Everyone sells 7.850 and 7.900. Which would be the better? A lil long or short?
393w Tfs 205cnc heads Victor Jr. manifold Tfs Stage 3 Cam Tfs 1.6rr
Posts: 1394 | From: Vallejo, Ca | Registered: Dec 2009
| :
|
|
Duncan Motors
¯
Member # 7045
|
posted
go for the closet one. that measurement was dead nuts, so just get close, those measuremenst are really close, thats why they dont get any more accurate in purchase size
Posts: 6310 | From: Vallejo | Registered: Sep 2006
| :
|
|
ItzStock
¯
Member # 9665
|
posted
haha i know to get close...those are the closest. they are both the same distance away. i was just wondering which way to go, longer or shorter?
Whatever i'll just buy one haha
Posts: 1394 | From: Vallejo, Ca | Registered: Dec 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
Part Number: CCA-7825-16, 7.870 through Summit. 5/16" pushrod.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
ItzStock
¯
Member # 9665
|
posted
How do those compare in strength to the one piece chromemoly rods (not correct length)>TFS-21406700 ?
Posts: 1394 | From: Vallejo, Ca | Registered: Dec 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
They are the correct ones and are heat treated and will work with guide plates. Outside of not being chromemoly, that's it. They would work for your setup no problem.
I'm still trying to figure out why you would want a pushrod that wasn't the proper length.
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|
ItzStock
¯
Member # 9665
|
posted
I don't want a pushrod that's not the right length. I just put that part number and pic as a reference to the type of pushrod I was asking about.
Also I was asking if I should go a lil long or short cause I couldn't find the length I wanted in the cromemoly pushrods. They only went every .050.
Now that you have found me the correct length pushrods and let me know they will be strong enough, I will get them....
Thanks JohnB
Posts: 1394 | From: Vallejo, Ca | Registered: Dec 2009
| :
|
|
JohnB
Tech Moderator
Member # 969
|
posted
The big question though is where was the rocker tip on the valve stem? You've got roughly .070 to play with, just depends on where it lies on the valve tip. You've got alot either way for pushrod length.
Call Summit, tell them your combo. Make sure you know the deck height and HG gasket thickness as well. I'm running 7.850's in my 393w, but everything is different.
Good luck!
-------------------- 1965 Shelby Cobra 1993 Cobra 2012 F150 Raptor 2020 GT500
Posts: 6523 | From: Orlando FL/Redding CA | Registered: Mar 2002
| :
|
|